Arena plus APK

List of contents of this article:

• 1, How to start the internal button video automatic transmission of Honda crv
• 2、How to start a manual transmission car, start
• 3, How to start the car to start video playback
• 4,How to start a manual transmission car
• 5, How to start an automatic transmission car, automatic transmission car start teaching video
• 6,Geely Boyue Correct Start-up Step Video

This How to start the internal button video automatic transmission of Tian crv

The one-click start button of Honda CRV is located in the lower left corner of the central control screen and enters the cab. As long as the key is nearby, you can directly press the button to start the engine. 1. Start/Stop Engine 1 Start: Step on the brake pedal and press the ignition button. 2 Shut down: After the vehicle is parked, press the start button to turn it off.

Automatic car driving steps: start the engine: the transmission lever can only start the engine in P and N gears.When the car is in a stationary state or the body is below 5km/h after starting, you must step on the brake pedal before choosing to exercise the gear and hold down the lock button on the gear lever to move the gear lever out of P gear or N gear.

The Honda CRV one-button start button is located in the lower left corner of the central control screen. When entering the cab, as long as the key is next to it, you can directly start the engine. Start/Turn off the engine 1 Start: Step on the brake pedal and press the ignition button. 2 Shutdown: After the vehicle is parked, press the start button to shut down.

Open the door on the driver's side of Dongfeng Honda crv. Put down the Dongfeng Honda crv electronic handbrake switch. Step on the brake pedal of Dongfeng Honda crv, and step on it to the bottom until you can't step on it, to prepare to start the engine.Press the one-button start button of Dongfeng Honda crv.

How to start a manual transmission car, start

Confirm gear and handbrake. Make sure that the gear is idle and the handbrake is in a pull-up state. Hang gear. Step on the clutch pedal and brake pedal, start the engine, put the gear in 1st gear, and then release the handbrake.Lift the clutch.

The correct start-up steps for the manual transmission car: make sure that the gear is in the idle gear before starting, and pull the handbrake well. The function of this step is to fix the car on the ground to avoid slipping when starting. Step on the brake and clutch pedal at the same time.

The starting steps of the manual transmission car are as follows: adjust the seat before getting on the car and driving, and make sure that your feet can step on the clutch, brake and accelerator.

After starting the car, step on the clutch completely with your left foot to prepare for the semi-clutch state. Push with the palm of your right hand and hang the shift lever gear into the first gear as the starting gear. Press the turn signal control lever down with your left hand, and turn on the left turn signal to prompt the front and rear of the car.

How to start the carStart video playback

First, we need to insert the car key into the ignition switch, and then gently unse the key to keep the ignition switch in "ON" gear, but do not start the engine immediately. Next, we need to put the transmission of the car in "P" gear, because only in this gear can the car start the engine.

Step on the brake pedal of the car. Press the one-button start button of the car. The car instrument lights up and the vehicle starts. Step on the car clutch pedal. Put the car on the first gear. Step on the accelerator pedal of the car while half lifting the clutch pedal of the car. When the vehicle is shaking, release the handbrake of the car to complete the start.

First of all, it is necessary to confirm whether the gear of the vehicle is in idle before starting the ignition. Then, step on the clutch, insert the key into the ignition hole, and stwe the key to the starting position.At this time, the engine will make a huhu sound, indicating that it has been started successfully.

There are two ways to start an automatic transmission car: use the car key and press the one-button start button in the car. Use the car key: Hold the car key and insert it into the keyhole. When inserting the key, you don't need to step on the brake. After inserting the key into the keyhole, turn clockwise, turn to the ACC position and stop. At this time, the car will be energized.

The method of igniting the car is as follows: insert the key in the Lock position without twisting it, wait for about 2 seconds, and then twisting the key can be directly through the ACC position and stop in the ON position and wait for about 5 seconds.

How to start the manual transmission car start video

1. Steps for starting the manual transmission car: Make sure that the gear is in the idle gear before starting, and pull the handbrake.

2. First of all, it is necessary to confirm whether the gear of the vehicle is in idle gear before starting. Then, step on the clutch, insert the key into the ignition hole, and stwe the key to the starting position. At this time, the engine will make a huhu sound, indicating that it has been started successfully.

3. Idle ignition is the prerequisite for manual transmission car ignition. Insert the car key into the ignition switch. Turn the key up and pause for a moment so that the oil pump can start the automatic inspection of the oil supply electrical equipment. Make sure that the gear lever is hung in the idle position. Step on the clutch.

4. The following are the steps for starting a manual transmission car: Make sure that the gear is in the "idle" position. Before the vehicle starts, the gear lever must be placed in the "idle" position. If it is hung in another gear, the vehicle may suddenly move forward or backward, causing safety problems.

5. The method of igniting the car with manual transmission is as follows: turn the ignition switch key clockwise to the START position, and rotate it forward a little harder. When starting, the ignition switch will automatically jump from the start gear back to the normal ignition gear. The manual transmission is the manual transmission (MT).

How to start the automatic transmission car, automatic transmission car start teaching video

Insert the car key into the key hole and rotate it for half a lap and start the power after the self-examination is completed. Step on the brake and hang the D gear. Release the handbrake. Turn on the left turn signal, observe whether there are pedestrians before and after, and press the horn to play a reminder role. Slowly release the brake and step on the accelerator. Start and complete.

Because it is automaticGear cars are easier to operate than manual gear cars, so now many people prefer to choose automatic transmission cars, but automatic transmission cars only have two pedals, accelerator and brakes. So what if the automatic transmission car is ignited? There are two ways to start an automatic transmission car: using the car key and pressing the one-button start button in the car.

First of all, in a word, the automatic gear car starts. First of all, step on the brake, start the engine, then the vehicle is in D gear and releases the handbrake. Finally, after releasing the brake pedal, the vehicle will start slowly. If you don't step on the accelerator or brake, the vehicle will drive at idle speed, and usually the speed will not exceed 7km/ H.

First, sit in the driver's seat and insert the car key into the ignition hole. Then, put the vehicle in the "P" gear and gently step on the brake pedal. Next, start the vehicle.On the car key, you can see three different positions: close, open and start. Turn the car key to the "start" position, and then release the key.

Start the automatic transmission car correctly: insert the key in the Lock position without twisting it, wait for about 2 seconds.

The correct start-up steps of the automatic transmission: first step on the brake, you need to hang it in the N gear to start the car; then push it from the N gear to the D gear; release the handbrake, and then lift your foot to release the footbrake to start.

Geely Boyue Correct Start-up Step Video

1. Manual transmission car start-up process: When starting on a flat ground, first hang the car to the idle state. Start the car, then step on the clutch and change to the first gear. Lift the clutch slowly and increase the throttle slightly.When the car is in a semi-linked state, release the car handbrake, but the clutch must not be sent too fast.

2. How to open the Geely Boyue automatic transmission Geely Boyue automatic transmission correctly start the vehicle steps video Geely Boyue automatic transmission starts correctly when the car is stationary, stepping on the clutch pedal and pressing the start button.

3. According to the query of Baidu Youjia, the driving steps of Geely Boyue cool are as follows: Enter the car: open the door and enter the car. Atten your seat belt and adjust the seat and rearview mirror. Start the car: Insert the key into the ignition switch and turn the key to start the car. Hot car: After starting the car, wait for a period of time to heat the car.

4. Start-up steps of manual transmission: When starting on flat ground, start in idle gear first. After starting the car, step on the clutch, change the gear to the first gear, and then slowly release the clutch.When you release the clutch, you need to give a little throttle. When the car is in a semi-linked state, release the car handbrake. Don't send the clutch too fast.